Courses

Together we promise abetter future

INTERNATIONAL PREPARATORY COURSES

This program is for the candidates preparing to attend International Certification programs conducted by UK and US. This program enables them to get International Certifications which are accepted worldwide. Candidates with experience in Welding and Piping field and those who want to upgrade their career in International job Market are the key takers of this program. These International Certifications makes the candidates at par with the International working Standards across the world.

  • CSWIP 3.1 Preparatory
  • CSWIP 3.2.1 Preparatory
  • CSWIP 3.2.2 Preparatory
  • BGAS - CSWIP GRADE II
  • BGAS - CSWIP GRADE I
  • AWS – CWI Preparatory
  • AWS – CSWIP Bridging
  • NACE
  • PCN NDT
  • Safety Course (ISEI)
  • NEBOSH
  • HSE Courses

AWS-CSWIP Bridging

This program covers welding inspection, particularly for practicing AWS – CWI welding inspectors and any one aspiring to be an AWS – CSWIP Bridging- Welding Inspector. The main emphasis is on what a professional welding inspector should know in actual practice. Course participants will undergo a rigorous programme to get them well versed with the codes and standards in use and fundamentals of welding inspection. Actual hands on examinations of weld replica with various inspection tools

Whom Should Attend the Course?

Welding Inspectors have an AWS Certification.

AWS-CSWIP Bridging

SUBJECTS

  • TYPICAL DUTIES AND RESPONSIBILITIES OF WELDING INSPECTOR.
  • WELDING TERMS AND DEFINITIONS.
  • WELDING IMPERFECTIONS.
  • MECHANICAL TESTING OF WELDS.
  • NON DESTRUCTIVE TESTING.
  • WELDING PROCEDURE/WELDER QUALIFICATION.
  • MATERIAL INSPECTION.
  • CODES AND STANDARDS.
  • WELDING SYMBOLS.
  • INTRODUCTION TO WELDING PROCESS.
  • MANUAL METAL ARC WELDING.
  • TUNGSTON INERT GAS WELDING.
  • METAL INERT GAS WELDING.
  • SUBMERGED ARC WELDING.
  • WELD REPAIRS.
  • RESIDUAL STRESS AND DISTORTION.
  • HEAT TREATMENT OF WELDS.
  • OXY FUEL GAS CUTTING.
  • BRAZING/BRONZE WELDING.
  • WELDING SAFETY.
  • WELDABILITY OF STEELS.
  • CALIBRATION OF EQIPMENTS.
  • THE PRACTICALS ON PLATE SAMPLES.
  • PIPE SAMPLES AND MACROGRAPHS.

OUR SPECIALITIES

  • CLASS TEST ON EVERY TOPIC.
  • QUESTION BANK OF AROUND 25000 QUESTIONS, .
  • PRACTICALS QUESTION/ANSWERS.
  • MACRO PRACTICALS.
  • SPECIAL NOTES ON POSSIBLE OUT SIDE QUESTIONS AND SEVERAL MOCK TESTS.

Employment Opportunities

Graduates may find employment as a certified QA/QC Certified Welding Inspector, Welding Instructor, QA/QC Certified Piping Inspector, QA/QC Certified Structural Inspector. Its depends upon qualifications and experience.

AWS-CWI Preparatory

AWS-WI Preparatory

The AWS is a certified welding inspector course is conducting AMERICAN WELDING SOCIETY. Welding inspector certification gives more advantage to the candidates for their career. It involves the great responsibility and a remarkable skill demonstration career. The CWI is widely recognized both nationally and internationally and successful companies have come to rely on this AWS Certification when ensuring the highest level of quality workmanship.

Whom Should Attend the Course?

  • Welding Inspector for a minimum of three years' experience related to the duties and responsibilities listed in clause 1.2.2, under qualified supervision.
  • Certified visual Welding Inspector (Level 1) for a minimum of two years' experience.
  • Welding Instructor, Welding Foremanand Welding Supervisor for minimum of five years' experience.

Subjects

  • WELDING INSPECTOR RESPONSIBILITIES,
  • WELDABILITY,
  • WELDING METALLURGY,
  • WELDING CHEMISTRY,
  • WELD JOINT PREPARATION,
  • DISCONTINUITIES IN WELDS/INSPECTION PROCESS,
  • WELDING PROCESSES (CODES, STANDARDS, SPECIFICATIONS)
  • WELDER QUALIFICATION AND CERTIFICATION,
  • WELDING PROCEDURE QUALIFICATION,
  • WELDING SYMBOLS,
  • MECHANICAL TESTS,
  • NDT TESTS AND SYMBOLS,
  • WELDING SAFETY,
  • THERMAL CUTTING PROCESSES.etc

OUR SPECIALITIES

Class test on every topic, Question bank of around many thousands of questions, practical's question/answers special notes on possible outside questions and several mock tests.Also we teach you the code of your option and question bank from the code

Employment Opportunities

Graduates may find employment as a certified QA/QC Certified Welding Inspector, Welding Instructor, QA/QC Certified Piping Inspector, QA/QC Certified Structural Inspector, and Project Planer. Its depends upon qualifications and experience.


BGAS-CSWIP GRADE II,BGAS-CSWIP GRADE I

BGAS is an International Certification scheme targets the painting inspectors. This course covers contents corrosion, specified coating conditions, surface preparation methods and standards. This BGAS certification approval is additional exposure to inspectors as it can extend their working capability on pipeline projects. This certification can lead you to a career that is engaging and promising on all levels.

Whom Should Attend the Course?

  • Candidates with or without experience in the painting inspection industry
  • Suitable for individuals engaged in the inspection and coating of new and existing pipe lines
BGAS-CSWIP GRADE II,BGAS-CSWIP GRADE I

SUBJECTS

  • CORROSION
  • SURFACE PREPARATION METHODS AND STANDARDS
  • SURFACE CONTAMINANTS AND TESTS FOR DETECTION
  • PAINT CONSTITUENTS AND BASIC TECHNOLOGY
  • SOLUTIONS AND DISPERSIONS
  • DRYING AND CURING OF PAINT FILMS
  • PAINT SYSTEMS
  • WATER BORNE COATINGS
  • PAINT MANUFACTURE
  • TESTING OF PAINTS FOR PROPERTIES AND PERFORMANCE
  • FILM THICKNESS
  • SPECIAL COATING CONDITIONS
  • CATHODIC PROTECTION
  • HOLIDAY/ PIN HOLE DETECTION
  • PAINT APPLICATION
  • METAL COATINGS
  • COATING FAULTS AND COLOUR
  • HEALTH AND SAFETY
  • DUTIES OF PAINTING INSPECTOR
  • SPECIFICATIONS FOR PAINT SYSTEMS AND PERFORMANCE REQUIREMENTS

OUR SPECIALITIES

  • CLASS TEST ON EVERY TOPIC,
  • QUESTION BANK OF AROUND THOUSANDS OF QUESTIONS,
  • PRACTICALS+QUESTION/ANSWERS,
  • SPECIAL NOTES ON POSSIBLE OUT SIDE QUESTIONS AND SEVERAL MOCK TESTS.

Employment Opportunities

Graduates may find employment as a certified QA/QC Certified painting Inspector, coating Instructor. Its depends upon qualifications and experience.

CSWIP 3.1 Preparatory

CSWIP 3.1 Preparatory

cSWIP Certification schemes are UKAS/Accredited to ISO/IEC 17024, the international standard for personal certification. The certification scheme for personnel (CSWIP) is a comprehensive scheme which provides for the examination and certification of individuals seeking to demonstrate knowledge and competence in their field of operation. The scope of CSWIP includes, among others, welding inspectors, welding supervisors, welding instructors, plant inspectors, under water inspectors, welders and NDT personals.

CSWIP is managed by the certification management board which acts as the governing board for certification in keeping with the requirements of the industries served by the scheme. The certification management board is UK based. All CSWIP boards and committees comprise member representatives of relevant industrial and other interest.

Whom Should Attend the Course?

  • Welding Inspector for a minimum of three year’s experience related to the duties and responsibilities listed in clause 1.2.2 of CSWIP document, under qualified supervision.
  • Certified visual Welding Inspector (Level 1) for a minimum of two years’ experience.
  • Welding Instructor, Welding Foreman, Welding Supervisor for minimum of five years’ experience

OUR SPECIALITIES

  • CLASS TEST ON EVERY TOPIC, .
  • QUESTION BANK OF AROUND 25000 QUESTIONS, .
  • PRACTICALS+QUESTION/ANSWERS, .
  • MACRO PRACTICALS, .
  • SPECIAL NOTES ON POSSIBLE OUT SIDE QUESTIONS AND SEVERAL MOCK TESTS.

Employment Opportunities

Graduates may find employment as a certified QA/QC Certified Welding Inspector, Welding Instructor, QA/QC Certified Piping Inspector, QA/QC Certified Structural Inspector, Project Planer. Its depends upon qualifications and experience.

Subjects

  • TYPICAL DUTIES AND RESPONSIBILITIES OF WELDING INSPECTOR.
  • WELDING TERMS AND DEFINITIONS,WELDING IMPERFECTION.
  • MECHANICAL TESTING OF WELDS.
  • NON DESTRUCTIVE TESTING.
  • WELDING PROCEDURE/WELDER QUALIFICATION.
  • MATERIAL INSPECTION.
  • CODES AND STANDARDS.
  • WELDING SYMBOLS.
  • INTRODUCTION TO WELDING PROCESS.
  • MANUAL METAL ARC WELDING.
  • TUNGSTON INERT GAS WELDING.
  • METAL INERT GAS WELDING.
  • SUBMERGED ARC WELDINGWELD REPAIRS.
  • RESIDUAL SRESS AND DISTORTION.
  • HEAT TREATMENT OF WELDS.
  • OXY FUEL GAS CUTTING .
  • BRAZING/BRONZE WELDING.
  • WELDING SAFETY.
  • WELDABILITY OF STEELS.
  • CALIBRATION OF EQIPMENTS.
  • THE PRACTICALS ON PLATE SAMPLES.
  • PIPE SAMPLES AND MACROGRAPHS.

CSWIP 3.2.1 Preparatory, CSWIP 3.2.2 Preparatory

CSWIP 3.2 is a senior welding inspector certification course. CSWIP Certification schemes are UKAS/Accredited to ISO/IEC 17024, the international standard for personal certification. The certification scheme for personnel (CSWIP) is a comprehensive scheme which provides for the examination and certification of individuals seeking to demonstrate knowledge and competence in their field of operation. The scope of CSWIP includes, among others, welding inspectors, welding supervisors, welding instructors, plant inspectors, under water inspectors, welders and NDT personals.

CSWIP is managed by the certification management board which acts as the governing board for certification in keeping with the requirements of the industries served by the scheme. The certification management board is UK based. All CSWIP boards and committees comprise member representatives of relevant industrial and other interest.

CSWIP 3.2.1,3.2.2 Preparatory,

Whom Should Attend the Course

  • This course is suitable for experienced welding inspectors and quality control staffs
  • Certified welding inspector for a minimum 2 year's experience
  • 5 years authenticated experience related to the welding inspection duties
  • Above candidates must have a valid CSWIP Level 2(3.1) certification

OUR SPECIALITIES

  • PRACTICALS+QUESTION/ANSWERS,
  • MACRO PRACTICALS,
  • SPECIAL NOTES ON POSSIBLE OUT SIDE QUESTIONS AND SEVERAL MOCK TESTS.
  • WE ARE COMMITED TO GIVE YOU HIGH QUALITY SENIOR INSPECTOR COURSE.

THE EXAMINATION FORMAT

Candidates who do not already hold a welding inspection certificate must also complete the full welding inspector (level2) examination in addition to the procedures out lined below

THEORY PART C3(1)

Specific welding technology (including audit question:4 questions from 6 time:1 hour 15 minutes.

THEORY PART C3 PART(2)

General welding theory, product technology and ndt,30 multiple choice questions, time allowed 45 minutes.

PRACTICAL PART A3(1)

Scrutinize and comment on three inspection related documents; time allowed 1 hour.

PRACTICAL PART B3

Examination of weld failures. Time allowed 1 hour.

PRACTICAL PART C3

Scrutiny and interpretation of a fabrication drawing. Time allowed 1 hour.


PASS MARK FOR ALL IS 70%.

Subjects

  • DUTIES OF THE SENIOR WELDING INSPECTOR.
  • TERMS AND DEFINITIONS.
  • PLANNING.
  • CODES AND STANDARDS.
  • CALIBRATION OF WELDING EQUIPMENT.
  • DESTRUCTIVE TESTING.
  • HEAT TREATMENT.
  • WPS AND WELDER QUALIFICATIONS.
  • MATERIAL INSPECTION.
  • RESIDUAL STRESS AND DISTORTION.
  • WELDABILITY OF STEELS.
  • WELD FRACTURES.


RADIOGRAPHIC INTERPRETATION-SUPPLEMENTARY.

EXAMINATION FORMAT:

THEORY PART D3

Standard radiographic interpretation theory, nature and properties of x and gamma rays, photographic aspects, fundamental aspects of radiographic quality, geometry of image formation, interpretation, 20 multi choice question time 30 minutes.

PRACTICAL PART D3

Radiographic interpretation in a number of radiographs.

Employment Opportunities

Graduates may find employment as a certified QA/QC Certified senior Welding Inspector, Senior Welding Instructorand Senior Welding Engineer.

NACE


NACE (National Association of Corrosion Engineers)

NACE is an international certification course for certified painting inspectors. Successful completion of the course and exams the students will be certified as a NACE certified coating inspector - Level I. NACE is a recognized as an authorized provider of continuing education units by the international association for continuing education and training.




Whom Should Attend the Course?

This course will benefit anyone interested in gaining a better understanding of coating application and inspection including.

  • Project Engineers
  • Quality assurance managers
  • Contractors
  • Paint applicators
  • Maintenance Personnel's
  • Blasters

Subjects

  • INTRODUCTION TO COATING INSPECTOR PROGRAM
  • CORROSION CONTROL
  • COATINGS
  • COATING AND THE INSPECTOR
  • COATING SPECIFICATION
  • TEAM WORK AND SUBARCTIC SURVIVAL EXERCISE
  • ENVIRONMENTAL TEST INSTRUMENTS
  • INSPECTION PROCEDURES
  • COATING SPECIFICATION ARC-CS2
  • INSPECTION DOCUMENTATION
  • SURFACE PREPARATION
  • ENVIRONMENTAL INSTRUMENTS PRACTICE LAB
  • COATING APPLICATION BY BRUSH, ROLLER AND MITT
  • COATING APPLICATION BY CONVENTIONAL SPRAY
  • COATING APPLICATION BY AIRLESS SPRAY
  • NON DESTRUCTIVE TEST INSTRUMENTS
  • INSTRUMENT PRACTICE LAB
  • FIELD PRACTICE LAB
  • MATERIAL SAFETY DATA SHEETS AND TECHNICAL SHEETS
  • PANEL INSPECTION
  • COATINGS TECHNOLOGY

Employment Opportunities

Graduates may find employment as a certified QA/QC Certified painting Inspector, coating Instructor. Its depends upon qualifications and experience.


Safety Course (ISEI)

The International Safety Educational Institute (ISEI) delivers osha based construction safety education worldwide. The ISEI health and safety curriculum is based on United State industry best practices and draws on our established history as trusted. The ISEI construction workplace safety training program is a train the trainer program empowering professional training partners and their construction safety trainers across the world.






Safety Course (ISEI)

Safety Practitioner

8 Hours
Prerequisite: none

Curriculum is designed for every worker at a construction work‐site. It emphasizes the importance of Knowing and applying fundamental safety practices at work. Trainers will be consistent with the course Objectives but customize the presentation to the needs of the participants. The curriculum consists of 8 hours of mandatory subjects. Participants receive a Safety Practitioner card (with photograph) and an attractive Award of Merit.


Safety Specialist

24 Hours
Prerequisite: none

C urriculum applies a higher level of safety awareness and application of safe work practices. It is designed for Laborers, Tradesman, Team Leaders, Site Supervisors or others with authority over the Work at a construction site as well as students who wish to advance to the Site Safety Technician class. In this course students will learn hazards found on a work site and the proper application of safe work Practices for their workers. The curriculum consists of 24 hours of mandatory subjects. Participants Receive a Safety Specialist card (with photograph) and an attractive Award of Merit.


scroll up